A small plug that puts your engine on your phone.
Plug in. Tap start. Watch it live.
Tap start. Ride. Get the full record.
GPS speed, route, distance and time on every ride, on any ski. With Link connected, the same recording carries RPM, boost, temperatures, battery voltage and throttle, so you can replay the ride with telemetry charts afterward.
- Speed runs and free rides, saved to your history
- Clear status before you go: location, Link and battery
- Save an encrypted backup to move ride history to a new phone
Find your crew on the water.
See riders on your lake, plan rides, join groups and save launch ramps and fuel stops. Location sharing is off until you turn it on, and you choose who sees you.
- Lake, Rides, Groups and Places in one map
- Leaderboards for top speed, longest ride and ride activity
- Messages and ride invites with your riders
Your ski, your build, your service log.
Add your skis, track installed parts, plan your next upgrade and log service. With Link, the app reads engine hours from the ski and opens the machine tools: Link Status, Startup Sport, Engine Codes, Service and Sensors.
- Maintenance history with next-service reminders
- Build planner with fitment for your exact ski
- SCOM and automatic Startup Sport on compatible Sea-Doo models*
Scan it. Read it. Clear supported codes.
Look up any code for free. With Link, scan supported modules engine-off, see each code with its module and next step, and clear supported stored ECM codes, then read the ECM again to confirm.
Scanning is read-only. Clearing a code does not repair the underlying fault.
SCAN YOUR SKI WITH LINK · $299.99
Pick the dash that fits how you ride.
Chrome dials, a live map you ride inside a compass ring, and more, in portrait and landscape. Readings shown are samples; live engine readings need Link on a supported ski, and the exact gauges depend on the model.
See what your dash can't.
Live engine data on your phone, the gauge style you like, and Ride Alerts you set for engine temp, battery, boost and RPM.*
One plug. Every ride gets the engine data.
- Plugs into the ski's diagnostic port and pairs with the free app over Bluetooth
- Live gauges, engine data logging and post-ride telemetry charts*
- Scan faults and clear supported stored ECM codes*
- Engine hours read straight into your Garage
- SCOM and automatic Startup Sport on compatible Sea-Doo models*
Start with the app. Add Link for the machine data.
| FEATURE | APP FREE |
APP + LINK $299.99 |
|---|---|---|
| GPS speed, ride recording, maps and history | ✓ | ✓ |
| Riders, groups, places and leaderboards | ✓ | ✓ |
| Garage, build planner and service log | ✓ | ✓ |
| Fault-code reference | ✓ | ✓ |
| Live RPM, boost, temperatures, voltage, throttle* | — | ✓ |
| Engine data logging and post-ride telemetry charts | — | ✓ |
| Scan faults and clear supported stored ECM codes* | — | ✓ |
| SCOM and automatic Startup Sport on compatible Sea-Doo models* | — | ✓ |
*Available readings depend on the exact model, year, ECU and supported data channels. Link engine data supports Sea-Doo; GPS rides work on any ski. SCOM and Startup Sport coverage: 2019–2026 Sea-Doo on the supported non-325 platform; the 325 platform is excluded. Clearing a code does not repair the underlying fault. Sea-Doo is a registered trademark of Bombardier Recreational Products Inc. GT40 Marine is independent and not affiliated with or endorsed by BRP.